DISC BLANKING ZIGZAG Systems
ZIG ZAG SYSTEM: high efficiency cables TO PRODUCE DISCS AND FIGURES.
POWER LINES TO OBTAIN DISCS AND FIGURES, with a maximum degree of efficiency in the use of material.
These lines can work to feed bands for the cutting of discs in simple zigzag, in quincunx etc; which will depend on the relationship between the diameter of the disc and the bandwidth used.
Coils of up to 20 tons and 1.800mm in diameter with plates from 0.5 to 8 mm in thickness and up to 1000 mm in width. The line speed is 60m/min, the output reaches up to 45 beats per minute of the press.
TRAPEZIUM BLANKING – Cutting systems
With the addition of a system of rotation of the body of the shears, trapezoids cutting lines allow cut formats with up to 20° of tilt between their faces.
The control turns the shear automatically and fully coordinated with the feeder line, allowing an accuracy of ± 0.05 mm, and cadences of up to 40 beats per minute.
FINE BLANKING System
FINE BLANKING SYSTEM: lines for FINE-CUT processing
POWER LINES FOR FINE CUTTING PRESSES where the main feature is high thickness and the manufacturing of parts in steel with a high strength index.
Coils up to 20 Tons and 2,000 mm in diameter with plates from 3mm to 17mm in thickness and up to 500mm in width. The line speed is 60m/min, the output reaches up to 30 beats per minute of the press.
These lines are equipped with very robust reels, and high levels of safety in the winding of the coil.