LONG POWER LINES
Composed for coil charging, winding, straightening, plates ion accumulation and feeder rollers may reach 120 beats per minute.
Coils up to 20 tons and 1,800 mm diameter with plates from 0.5 to 8 mm in thickness and width up to 2,000 mm. The line speed is 100 m/min, the production reaches 120 beats per minute of the press.
COMPACT POWER LINES
for saving floor space in the production plant, these are comprised of coil charger, winder and feeder-straightener.
Coils up to 25 tons and 2,000 mm diameter, plates from 0.5 to 10 mm thick and up to 2100 mm wide. The line speed is 70m/min, production reaches up to 60 beats per minute of the press.
High production systems
ROD-GPM SYSTEM: high productivity lines in large sections
POWER LINES FOR high throughput PRESSES which can reach up to 80 beats per minute.
Coils up to 25 Tons and 2.000mm in diameter with plates from 0.5 to 10 mm thick and up to 2000 mm wide.
High-Strength Index Systems
ALE SYSTEM processing of high-strength materials.
POWER LINES FOR PRESSES FOR PROCESSING MATERIALS of up to 1000 N/mm ².
Coils up to 25 Tons and 2.000mm in diameter with plates from 0.5 to 10 mm thick and up to 1500 mm wide. The production reaches up to 60 beats per minute of the press.
The great robustness of the straighteners in either die type or crocodile type allows the processing of bands of high strength alloy steel. Furthermore the special winder assembly for these bands allows sheets to be stamped safely and in reduced times.
Systems for PROCESSING LARGE COILS
SYSTEM FOR LARGE COILS: SUPPLY LINES FOR LARGE COILS.
Coils up to 25 Tons and 2.000mm in diameter and from plate 0.5 to 10mm thick and up to 2000mm wide.
Production goes up 60 beats per minute of the press.
The main feature of these lines is the great strength of the reels with reduced power transmission integrated into the frame of the machine.
Furthermore these winders do not require a supported mandrel, so the coil change times are reduced.
Systems for delicate metals
These systems allow you to work with delicate materials, both in terms of a low elastic index (aluminium, brass, etc…) and in terms of delicate surface features (mirror polished, painted, laminated, etc…).
These systems can be used with the same machine that is necessary to process steels COMBINED LINES FOR STEEL AND ALUMINUM; or DOUBLE LINES which have two straighteners or roller cassette systems.
ZIGZAG Systems for
High efficiency POWER LINES FOR OBTAINING DISCS AND FIGURES, with a maximum degree of efficiency in the use of material.
These lines can work by feeding the band which cuts the disc in simple zigzag, quincunx etc; which depend on the relationship between the diameter of the disc and the bandwidth used.
Coils of up to 20 tons and 1.800mm in diameter with plates from 0.5 to 8 mm in thickness and width of up to 1000 mm. The line speed is 60m/min, the output comes to 45 beats per minute of the press.
FINE BLANKING System
FINE BLANKING SYSTEM: lines for processing FINE-CUT POWER LINES FOR FINE-CUTTING PRESSES where the main feature is the high thickness and the parts are manufactured in steel with a high strength index.
Coils of up to 20 Tons and 2,000 mm in diameter, plates of 3 to 17mm in thickness and width up to 500mm. The line speed is 60m/min, the output comes to 30 beats per minute of the press.
These lines are equipped with very robust reels and high levels of safety in the winding of the coil.